Series 2.5 Intensifier

A2.5J intensifier2.5 IntensifierThe Harwood Series 2.5 intensifier is a compact trouble-free, manually operated unit, of exceptional versatility and utility for operations on the laboratory scale. Designed for simplicity of operation and maintenance, the series 2.5 intensifier may be completely disassembled and reassembled in a few minutes. The high pressure cylinder is rugged monobloc construction of alloy steel.

 

Series 2.5 intensifiers are single acting units, but can be used with auxiliary equipment as single piston pumps. These units are primarily useful in systems of small capacity where only a few strokes are needed to develop the pressure required.

 

The table below gives the general characteristics of Harwood Series 2.5 intensifiers.  In general, an air operated pump is used to supply the drive and inlet pressures. For pressures above 140K a shrink fit mild steel jacket is supplied (as pictured).  As an option, the intensifier can be fitted with proximity switches to provide a signal for automatic reverse at the end of each stroke. Other custom modifications are available upon request. Intensifier Chart, both single and double-acting, are also available.

 

Intensifier Characteristics

Model

Maximum High Pressure PSI

Minimum Inlet Pressure   PSI

Maximum Drive Pressure   PSI

Stroke

Piston Diameter

Displacements
in3          cm3

A2.5J

200,000

5,000

13,750

4″

.625″

1.22

20.1

A2.5

140,000

5,000

10,000

4″

.625″

1.22

20.1

B2.5

100,000

5,000

10,000

4″

.750″

1.76

28.9